Understand the key terms in sea freight – from FCL and LCL to Bill of Lading, ETA, ETD and demurrage, as well as container types like Open Top, Reefer and Flat Rack.
Sea freight is one of the most important modes of transport in global trade and is ideal for large volumes, international supply chains and containerized cargo flows.
Sea freight refers to the transport of goods by ship across international sea routes. It is especially cost-effective for large volumes, heavy cargo and containerized shipments. In global trade, sea freight plays a central role in both imports and exports.
Most sea freight shipments are transported in standardized containers – efficient, scalable and globally compatible.
Sea freight is slower than air freight, but significantly more cost-effective for larger volumes.
Especially for predictable supply chains and regular imports, sea freight often offers the best balance between price and capacity.
Here you’ll find essential sea freight terminology – clearly explained and grouped by topic. This is especially helpful when comparing quotes, speaking with freight forwarders or planning imports.
A full container is used by a single shipper.
FCL is suitable for larger shipments where a container is either fully utilized or used exclusively.
Part load in a consolidated container.
Several smaller shipments are consolidated into one container. This is especially worthwhile for lower volumes.
Transport of general cargo without containers.
This transport method is used when goods cannot be containerized due to their size, weight or shape.
The central transport document in sea freight.
The Bill of Lading confirms receipt of the goods, documents the transport contract and, depending on the type issued, may serve as proof of title.
Freight forwarder or logistics provider for international transport.
The freight forwarder coordinates transport, booking, documentation, pre-carriage, on-carriage and communication between all parties involved.
Commercial invoice for customs and clearance.
The commercial invoice contains the key product and value details and forms an important basis for customs clearance.
Detailed packing list of the shipment.
The packing list shows quantities, dimensions, weights and packaging units and helps with handling and customs inspections.
Registration number for companies in customs processes.
For many imports and exports in the EU, an EORI number is required so that businesses can be identified for customs purposes.
Estimated arrival time of the shipment.
ETA is important for planning warehousing, customs clearance, delivery and all downstream logistics processes.
Estimated departure time of the vessel.
ETD marks the planned start of the sea voyage and is a key reference point for overall transport planning.
Total transport duration.
Transit time includes the time at sea and often also transshipments, intermediate stops, as well as pre-carriage and on-carriage.
Port where the shipment is loaded.
The Port of Loading is the port where the goods are loaded onto the vessel.
Port where the shipment is unloaded.
The Port of Discharge is the port where the goods are unloaded from the vessel and made available for further handling.
Reloading at an intermediate port.
In a transshipment, the container is transferred to another vessel at an intermediate port.
Direct transport without transshipment.
A direct connection often reduces the risk of delays and makes planning easier.
Cancellation of a scheduled vessel departure.
Blank sailings can lead to delays, capacity shortages and disruptions in the supply chain.
Shipment moved to the next sailing.
A roll over often occurs due to overbooking, lack of capacity or operational issues.
Standard unit of measurement for container capacity.
One 20-foot container equals 1 TEU. This unit is used to compare the capacities of vessels and terminals.
Unit for 40-foot containers.
One 40-foot container equals 1 FEU, or 2 TEU.
Standard container without refrigeration.
The dry container is the most commonly used container type for general, dry and non-temperature-controlled cargo.
Refrigerated container for temperature-sensitive goods.
Reefer containers are used for food, pharmaceuticals and other products that must remain at a constant temperature during transport.
Charge for keeping a container too long at the port.
These costs arise when a container is not picked up from the terminal within the free time allowed.
Charge for returning a container late.
Detention applies when the container remains outside the port or terminal for too long.
Port charges for container handling.
THC includes, among other things, moving, positioning and technical handling of the container within the terminal.
Free period for pickup or return.
Once the free time expires, demurrage or detention charges may apply.
Fuel surcharge.
BAF offsets fluctuations in fuel costs and is a common surcharge in sea freight quotes.
Currency surcharge.
This surcharge is intended to offset exchange rate fluctuations between booking and invoicing.
Seasonal surcharge during peak periods.
During periods of especially high demand, shipping lines may apply additional peak season surcharges.
General freight rate increase.
Shipping lines adjust their rates regularly. A GRI is a general price increase on specific trade lanes.
Shared loss principle in maritime transport.
If extraordinary measures are taken to save the vessel and cargo, the resulting costs may be shared among multiple parties.
Booked but unused shipment.
If a confirmed booking is not used, no-show fees or rebooking charges may apply.
Cargo exceeding standard container dimensions.
OOG cargo is too wide, too high or too long for standard containers and is often loaded on flat rack or open top equipment.
Depending on the cargo, weight, volume and loading requirements, different container types are used. In addition to the classic 20-foot or 40-foot container, there are also special containers for refrigerated cargo, oversized goods or liquids.
The classic standard container for heavy or compact cargo.
The 20-foot container is especially suitable for goods with higher weight and lower volume. It is commonly used for machine parts, cartons, pallets or raw materials.
More loading volume for larger standard shipments.
The 40-foot container offers significantly more space than the 20-foot version and is ideal for bulky, but not extremely heavy goods such as textiles, packaging or consumer products.
More internal height for bulky or high-stack cargo.
The high cube container is taller than the standard 40-foot container and is especially suitable when additional vertical storage space is required.
Open-top container solution for overheight or difficult-to-load cargo.
Open top containers are used when cargo does not fit through standard container doors or needs to be loaded from above by crane.
For overwidth, heavy or irregularly shaped cargo.
Flat rack containers have no fixed side walls and are suitable for cargo that does not fit into a conventional container.
Refrigerated container for temperature-controlled transport.
Reefer containers maintain constant temperatures throughout the entire transport chain and are essential for sensitive or perishable goods.
Special container for liquids, gases or chemical substances.
Tank containers consist of a tank within a standardized frame and are suitable for the safe multimodal transport of liquid products.
Container with removable steel roof for demanding loading scenarios.
Hard top containers are similar to open tops, but they have a solid removable roof. This is practical for heavy or tall goods that need to be loaded from above.
Container with side opening for easier handling.
Open side containers have a side opening in addition to the rear doors. This makes loading and unloading long, bulky or difficult-to-access goods much easier.
Many questions in sea freight are not just about price, but also about transit time, control, handling and risk. These comparisons help put things into perspective.
FCL is usually faster, more direct and easier to control. LCL makes sense for smaller shipments, but often involves more handling and longer transit times.
20-foot containers are strong for heavy, compact cargo. 40-foot containers offer more volume and are ideal for large, but not extremely heavy shipments.
Dry containers are intended for standard cargo. Reefer containers are used when temperature control throughout the entire transport chain is critical.
Standard containers cover the majority of all sea freight shipments. Special containers such as Open Top, Flat Rack or Tank become important when cargo has specific requirements.
A compact FAQ covering common questions about containers, transit times, costs and transport planning.
In most cases, sea freight is significantly cheaper than air freight, especially for large volumes, heavy goods and predictable supply chains.
FCL is usually the better choice when you have enough volume or when you want more control, less handling and more stable transit times.
Demurrage is a charge incurred when a container remains at the port or terminal beyond the allowed free time.
ETD is the planned departure time, while ETA is the planned arrival time of the shipment. Both are essential for operational transport planning.
For bulky, overwidth or overheight cargo, Open Top, Flat Rack, Hard Top or other special containers are often used.
The Bill of Lading is one of the most important documents in sea freight. It confirms receipt of the goods and documents the transport contract.
One scalable external partner.
Langfeldstr. 11 · 91058 Erlangen · Germany
info@expreso-solutions.com+49 9131 9278060© 2026 Expreso Solutions GmbH.