Understand the most important terms in road freight transport – from FTL and LTL to CMR, Carnet TIR, loading meters, transit times, and the most important truck types and processes in domestic and international overland transport.
Road freight is one of the most important transport modes in Europe. It is ideal for flexible door-to-door deliveries, partial and full truck loads, sourcing, distribution, and cross-border transport.
Road freight refers to the transport of goods by road – usually by truck, semi-trailer, van, or specialist vehicle. In road cargo transport, shipments are moved domestically and internationally between warehouses, factories, ports, terminals, transshipment points, and consignees. Especially in Europe, road freight is a central part of modern supply chains because it is flexible, easy to plan, and ideal for door-to-door transport.
Road freight is ideal for direct pickups and deliveries without additional port or airport processes.
Whether individual pallets, general cargo, partial loads, or full truckloads – road freight covers many shipment sizes flexibly.
Especially in European trade, road freight is often the most economical solution for regular, planned, and time-sensitive transport.
For many customers, not only the price matters, but also the process. This is how a typical road transport shipment works in practice.
Based on weight, dimensions, number of pallets, loading meters, type of goods, and route, it is determined whether LTL, PTL, or FTL is the right transport solution.
The goods are collected from the shipper, loaded onto the appropriate truck or trailer, and secured for transport.
Depending on the service, the transport takes place directly or via transshipment terminals. Afterwards, the shipment is delivered to the consignee and unloaded.
Here you will find key road freight terminology – clearly explained and grouped by topic. This helps with quotations, transport inquiries, tenders, and communication with freight forwarders.
An entire truck is booked exclusively for one shipment.
FTL is suitable for larger shipments, higher transit-time requirements, and shipments that should be transported directly from A to B without transshipment.
A partial load where multiple shipments share one truck.
LTL is ideal for smaller to medium-sized shipments when a full truck is not required. Transport costs are calculated proportionally based on the space used.
A partial load with more volume than classic groupage freight.
PTL sits between LTL and FTL. Often, a larger portion of the loading space is booked without using the full capacity of an entire truck.
Smaller shipments, usually palletized or collated, moved in consolidated transport.
Groupage is transported via hub-and-spoke networks, transshipment warehouses, and consolidation systems. This is especially economical for smaller shipments.
The international consignment note for road freight transport.
The CMR documents the contract of carriage and contains key information about the consignor, consignee, goods, number of packages, and transport route.
Customs document for international transit transport.
The Carnet TIR is used for certain cross-border transports to simplify transit through multiple customs territories.
Commercial invoice for customs and cargo value purposes.
The commercial invoice is an important basis for customs clearance, tax calculation, and cargo valuation in international road transport.
Packing list with quantities, weights, and packaging units.
The packing list helps with loading, inspection, customs clearance, and unloading of the goods.
Registration number for companies in customs processes.
For many cross-border transports involving customs procedures, an EORI number is required so that companies can be clearly identified.
Customs declaration for exports to non-EU countries.
For exports outside the EU, an export declaration is usually required before the goods may leave the customs territory.
Unit of measurement for occupied loading space in a truck.
Loading meters indicate how much linear loading space a shipment occupies in the vehicle. This is especially important for bulky or non-stackable goods.
Total weight including packaging.
Gross weight is a key factor for vehicle selection, freight rates, axle load, and cargo securing.
Calculated weight based on volume.
For light but bulky cargo, not only the actual weight, but also the volume is often taken into account for pricing.
Unit of measurement for the number of pallet positions in a truck.
Pallet spaces are especially important in groupage, LTL, and PTL quotations to calculate the required space in the vehicle.
Estimated arrival time of the shipment.
ETA helps with warehouse planning, unloading slots, staffing, and coordination of goods receipt.
Estimated departure time.
ETD marks the planned start of the transport and is an important reference point for further scheduling.
Total transport time from dispatch to delivery.
Transit time includes either direct transit or additional handling in networks and depots, depending on the service.
Direct transport without additional transshipment points.
Direct transport is particularly useful for time-critical, sensitive, or larger shipments.
Central transshipment station in groupage or consolidation transport.
At hubs, shipments are sorted, consolidated, and distributed onto new routes.
The final transport leg to the consignee.
The last mile is often especially sensitive because delivery slots, unloading conditions, and customer expectations all come together here.
Securing the goods against shifting, tipping, or damage.
Proper cargo securing is essential in road freight for safety, liability, and damage-free transport.
Regulations for the transport of dangerous goods by road.
Dangerous goods transport is subject to special rules regarding marking, documentation, packaging, and vehicle equipment.
Loading aid on the vehicle for loading and unloading without a ramp.
A tail lift is particularly important when there is no loading ramp or forklift available at the pickup or delivery location.
Specified slot for delivery or pickup.
Especially in industry, retail, and warehousing, fixed time slots are crucial for smooth processes and avoiding waiting times.
A booked pickup or loading does not take place.
If a confirmed booking is not used or the goods are not ready for dispatch, additional costs may arise.
Additional costs caused by longer vehicle waiting times.
Delays during loading or unloading, missing documents, or goods that are not prepared can lead to waiting and detention charges.
In road freight, a distinction must be made between the tractor unit or vehicle class and the actual trailer or body type. Both are important for transport planning: the trailer mainly determines the function, loading and unloading options, and cargo protection. The vehicle class, on the other hand, mainly determines payload, pallet spaces, loading meters, and typical use cases.
Of course, there are many more trailer types in road freight – for example flatbeds, coil wells, tankers, silos, walking floors, or special heavy-haul and specialist trailers. However, for day-to-day road freight, the following five types are the most important and most commonly relevant for standard inquiries, industry, trade, and temperature-controlled transport.
The most important standard trailer in European road freight.
The curtainsider trailer – often also called a tautliner or curtainsider – is the absolute standard in road freight transport. It is especially flexible because, depending on the version, loading is possible from the side, rear, and in some cases even from above.
Closed trailer for protected and secure transport.
The box trailer is fully enclosed and protects the cargo especially well from weather, dirt, and unauthorized access. It is ideal for sensitive, high-value, or theft-prone goods.
For temperature-controlled transport with regulated cooling.
Reefer trailers are used for goods that must be transported continuously chilled or temperature-controlled. These include food, fresh products, pharmaceuticals, and other temperature-sensitive cargo.
More internal height for especially voluminous goods.
The mega trailer is basically a special curtainsider trailer with additional internal height. It is often used when more volume or height is needed – for example for light but high-volume goods or in certain automotive and industrial sectors.
Special trailer with sliding cover for sensitive cargo.
The Conestoga is a specialist trailer with a sliding rigid frame system and cover. It combines the advantages of an open trailer with additional weather protection and is mainly used for sensitive machinery, metal products, or project cargo.
Vehicle classes are mainly about capacity and use case: how many pallet positions are possible, how many loading meters are available, and what is the typical payload? These figures are always approximate, as they can vary slightly depending on body type, manufacturer, axles, equipment, and country.
For courier trips, express logistics, and smaller direct transports.
The 3.5-tonner is especially flexible and ideal for urgent deliveries, city distribution, small shipments, or direct runs without transshipment. It is much smaller than a classic truck, but quicker to deploy and often more practical for narrow access roads.
Compact truck for regional distribution and general cargo.
The 7.5-tonner is frequently used in regional distribution. It is larger than a van, but still relatively maneuverable and well suited for deliveries with restricted access, city centers, or shorter routes.
Frequently used for distribution, general cargo, and factory traffic.
The 12-tonner offers significantly more payload and loading space than smaller vehicles. It is often used in general cargo networks, regional transport, and regular deliveries in retail or industry.
Heavy rigid truck for larger regional and national transports.
The 18-tonner is a classic heavy distribution truck and is often used when more payload is required, but a full tractor-trailer combination is not yet necessary. It is widely used in regional and national distribution traffic.
The standard for FTL, international transport, and high capacities.
The 40-tonner with tractor unit and trailer is the most important vehicle combination in European long-haul transport. It handles the majority of classic full and partial loads and is the benchmark for pallet spaces, loading meters, and payload in road freight transport.
In road freight transport, it is not just about price, but also about transit time, handling, shipment size, and flexibility. These comparisons help provide orientation.
FTL is usually more direct, faster, and easier to control. LTL is more economical for smaller shipments, but often involves more handling and longer transit times.
Groupage is ideal for small shipments and dense networks. Direct transport makes sense when time, security, or sensitive cargo are more important.
Curtainsiders are more flexible for loading. Box trailers offer more protection for sensitive or valuable goods.
Standard vehicles cover the majority of all transports. Specialist vehicles such as reefers, tank trailers, or flatbeds become important when the cargo has special requirements.
A compact FAQ with common questions about truck transport, documents, transit times, loading meters, and transport planning.
FTL means that an entire truck is used exclusively for one shipment. LTL means that several shipments share the available cargo space.
The CMR is the international consignment note in cross-border road freight transport and documents the most important transport data.
A Carnet TIR can be used for certain international transit shipments when goods are transported through several customs territories.
Loading meters indicate how much loading space a shipment occupies in the vehicle. They are particularly important for bulky or non-stackable cargo.
For chilled or temperature-sensitive products, a reefer trailer or temperature-controlled trailer is typically used.
Key factors include route, distance, border clearance, service type, transshipment points, time slots, and whether the transport is direct or consolidated.
Direct transport is especially suitable for time-critical deliveries, sensitive cargo, larger shipments, or when as little handling as possible is desired.
Important details include pickup and delivery address, weight, dimensions, number of pallets, loading meters, type of goods, stackability, required transit time, and any customs or special requirements.
Whether groupage, partial load, or a full truck: with the right understanding of terms, documents, vehicle types, and processes, transports can be calculated accurately, planned efficiently, and coordinated better with customers, suppliers, and freight forwarders.
One scalable external partner.
Langfeldstr. 11 · 91058 Erlangen · Germany
info@expreso-solutions.com+49 9131 9278060© 2026 Expreso Solutions GmbH.